Difference between revisions of "Category:Internal Combustion"

From fswiki.us
Jump to navigation Jump to search
(Created page with "Category:Powertrain")
 
Line 1: Line 1:
 
[[Category:Powertrain]]
 
[[Category:Powertrain]]
 +
 +
 +
[note: should create page for each subsystem so this page doesn't end up miles long]
 +
 +
 +
Components:
 +
 +
 +
Intake
 +
 +
 +
Engine
 +
 +
 +
Engine Control
 +
 +
 +
Fuel
 +
 +
 +
Cooling
 +
 +
 +
Exhaust
 +
 +
 +
Drivetrain
 +
 +
 +
 +
 +
=Engine:=
 +
As of 2019, the FSAE rules require an internal combustion engine with a displacement of 710cc or less. Available OEM motors within this displacement limit are largely sourced from motorcycles and snowmobiles.
 +
=Intake=
 +
All air used by the engine(s) for combustion must pass through a 25mm opening, commonly referred to as a 'restrictor'. For naturally aspirated engines, this restriction limits the maximum power output from the engine to about 100 hp.

Revision as of 15:45, 14 May 2020


[note: should create page for each subsystem so this page doesn't end up miles long]


Components:


Intake


Engine


Engine Control


Fuel


Cooling


Exhaust


Drivetrain



Engine:

As of 2019, the FSAE rules require an internal combustion engine with a displacement of 710cc or less. Available OEM motors within this displacement limit are largely sourced from motorcycles and snowmobiles.

Intake

All air used by the engine(s) for combustion must pass through a 25mm opening, commonly referred to as a 'restrictor'. For naturally aspirated engines, this restriction limits the maximum power output from the engine to about 100 hp.

Pages in category "Internal Combustion"

The following 16 pages are in this category, out of 16 total.