Difference between revisions of "Safety Wire"
Jump to navigation
Jump to search
SpookySimon (talk | contribs) (writing a bit, will add more later) |
|||
| Line 1: | Line 1: | ||
| − | + | '''Safety wire''' is as a positive retention strategy for bolts in blind holes. Made of thin steel wire, it is threaded through the heads of bolts to stop any change of rotation. To ensure the bolts cannot back out of the hole, the wire is threaded around the bolt head in the tightening direction, and the wire is twisted to lock the bolt to the wire and provide tension to the system. <-reword this. | |
| + | |||
| + | On occasion, safety wire can be used in conjunction with other positive locking mechanisms, but it is not advised to safety-wire a bolt that is retained by a nut. | ||
| + | |||
| + | <!-- safe practice is to use it even if the bolt is loctited in or has a locknut. no it's not lol, that would be goofy mode--> | ||
[[File:Safetywire.jpg|right|middle|thumb|Examples of Safety Wiring]] | [[File:Safetywire.jpg|right|middle|thumb|Examples of Safety Wiring]] | ||
| + | [[Category:Fasteners]] | ||
Revision as of 16:49, 22 May 2022
Safety wire is as a positive retention strategy for bolts in blind holes. Made of thin steel wire, it is threaded through the heads of bolts to stop any change of rotation. To ensure the bolts cannot back out of the hole, the wire is threaded around the bolt head in the tightening direction, and the wire is twisted to lock the bolt to the wire and provide tension to the system. <-reword this.
On occasion, safety wire can be used in conjunction with other positive locking mechanisms, but it is not advised to safety-wire a bolt that is retained by a nut.
