http://fswiki.us/api.php?action=feedcontributions&feedformat=atom&user=Rocher 2026-07-26T16:58:56Z User contributions MediaWiki 1.34.1 http://fswiki.us/index.php?title=User:Rocher&diff=1789 2020-06-13T05:01:55Z

<p>Rocher: Shameless plug</p> <hr /> <div>Carbon vinyl wrapped carbon<br /> <br /> <br /> <br /> <br /> &lt;span class=&quot;vanity-name__domain&quot;&gt;www.linkedin.com/in/&lt;/span&gt;&lt;span class=&quot;vanity-name__display-name&quot;&gt;remi-durocher&lt;/span&gt;</div>

Rocher http://fswiki.us/index.php?title=Composite&diff=1788 2020-06-13T04:47:55Z

<p>Rocher: </p> <hr /> <div>A composite is a material which is composed of two physically distinct and mechanically separable phases. One material serves as the fiber while a second serves as the matrix.<br /> <br /> <br /> <br /> <br /> ===Matrix&lt;br /&gt;===<br /> <br /> <br /> <br /> ===Fiber===<br /> <br /> ==Composite Forms and Processing Methods&lt;br /&gt;==<br /> Manufacturing of composite is an essential factor which should be considered when design composite components. The type of material, the form of material, mold design and processing method are all factors that need to be considered. Below are common forms and processing methods used by teams, but there are various other methods available.<br /> ===Prepreg===<br /> ====Curing====<br /> Ramp <br /> <br /> <br /> Dwell<br /> <br /> <br /> Cool down<br /> <br /> <br /> <br /> <br /> ===Dry Weave===<br /> ====Resin Infusion====<br /> Resin is provided succ to flow through the dry weave <br /> <br /> <br /> <br /> <br /> ====Wetlay====<br /> Resin is applied, usually by pouring <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [[Category:Materials]]<br /> &lt;span class=&quot;code&quot;&gt;&lt;/span&gt;</div>

Rocher http://fswiki.us/index.php?title=Structural_Equivalency_Spreadsheet&diff=1785 2020-06-13T02:57:49Z

<p>Rocher: </p> <hr /> <div>The Structural Equivalency Spreadsheet (SES) is a technical document used to ensure chassis and frame designs meet competition rules. Submission is required for all teams participating in the FSAE and Formula Student competitions. The templates vary across competitions and years. A summary of each is below with walkthroughs if available.<br /> <br /> <br /> =Formula SAE - SAE International=<br /> The SES template may be found at the FSAEonline.com [https://www.fsaeonline.com/cdsweb/gen/DocumentResources.aspx Document Resources] page.<br /> <br /> <br /> <br /> <br /> FSAE Michigan, FSAE North, FSAE California, and SAE Australasia use this template.<br /> <br /> <br /> <br /> <br /> ==Walkthough - 2019 edition==<br /> The SES template has changed form over the years with the most recent refresh in the 2020 season, combining the SES and IAD document submittals. The video below walks through the SES population process as of 2019.<br /> <br /> &lt;br /&gt;&lt;youtube&gt;&lt;a href=&quot;https://www.youtube.com/watch?v=QUXIFI6CVtU&amp;feature=youtu.be&quot;&gt;https://www.youtube.com/watch?v=QUXIFI6CVtU&amp;feature=youtu.be&lt;/a&gt;&lt;/youtube&gt;<br /> <br /> <br /> <br /> <br /> =Formula Student - iMechE=<br /> The iMechE Formula Student SES templates may be found on the iMechE website at[https://www.imeche.org/events/formula-student/team-information/forms-and-documents https://www.imeche.org/events/formula-student/team-information/forms-and-documents].<br /> <br /> <br /> <br /> <br /> A walkthrough was published in 2017 on the iMechE website written by Alex Darvill, Technical Scrutineer.[https://www.imeche.org/docs/default-source/1-oscar/formula-student/fs2017-guide-for-ses-submissions.pdf?sfvrsn=2 https://www.imeche.org/docs/default-source/1-oscar/formula-student/fs2017-guide-for-ses-submissions.pdf?sfvrsn=2]<br /> <br /> <br /> <br /> <br /> [[Category:Chassis]]</div>

Rocher http://fswiki.us/index.php?title=User:Rocher&diff=1569 2020-05-24T03:34:10Z

<p>Rocher: </p> <hr /> <div>Carbon vinyl wrapped carbon</div>

Rocher http://fswiki.us/index.php?title=User:Rocher&diff=1565 2020-05-24T02:35:54Z

<p>Rocher: </p> <hr /> <div>Carbon vinyl wrapped carbon<br /> <br /> <br /> &quot;Has a Reddit account&quot; <br /> -DP CFD<br /> <br /> <br /> [[File:DPCFDiswrong2.png|left|middle|thumb|DPCFD thinking for some reason Rocher has a reddit account when he doesn't]]</div>

Rocher http://fswiki.us/index.php?title=User:Rocher&diff=1564 2020-05-24T02:35:37Z

<p>Rocher: Fixed image</p> <hr /> <div>Carbon vinyl wrapped carbon<br /> <br /> <br /> &quot;Has a Reddit account&quot; <br /> -DP CFD<br /> <br /> <br /> <br /> <br /> [[File:DPCFDiswrong2.png|left|middle|thumb|DPCFD thinking for some reason Rocher has a reddit account when he doesn't]]</div>

Rocher http://fswiki.us/index.php?title=File:DPCFDiswrong2.png&diff=1563 2020-05-24T02:34:59Z

<p>Rocher: </p> <hr /> <div></div>

Rocher http://fswiki.us/index.php?title=User:Rocher&diff=1562 2020-05-24T02:06:45Z

<p>Rocher: </p> <hr /> <div>Carbon vinyl wrapped carbon<br /> <br /> <br /> &quot;Has a Reddit account&quot; <br /> -DP CFD<br /> <br /> [[File:DPCFDiswrong.jpg|left|middle|thumb|DPCFD thinking for some reason Rocher has a reddit account when he doesn't]]</div>

Rocher http://fswiki.us/index.php?title=User:Rocher&diff=1561 2020-05-24T02:06:22Z

<p>Rocher: Putting the facts straight</p> <hr /> <div>Carbon vinyl wrapped carbon<br /> <br /> <br /> &quot;Has a Reddit account&quot; <br /> <br /> <br /> -DP CFD<br /> <br /> <br /> <br /> <br /> [[File:DPCFDiswrong.jpg|left|middle|thumb|DPCFD thinking for some reason Rocher has a reddit account when he doesn't]]</div>

Rocher http://fswiki.us/index.php?title=File:DPCFDiswrong.jpg&diff=1560 2020-05-24T02:05:36Z

<p>Rocher: </p> <hr /> <div></div>

Rocher http://fswiki.us/index.php?title=User:Rocher&diff=1559 2020-05-24T02:03:30Z

<p>Rocher: Undo revision 1532 by Rocher (talk)</p> <hr /> <div>Carbon vinyl wrapped carbon<br /> <br /> <br /> Has a Reddit account</div>

Rocher http://fswiki.us/index.php?title=User:Rocher&diff=1532 2020-05-23T01:07:17Z

<p>Rocher: </p> <hr /> <div>Carbon vinyl wrapped carbon</div>

Rocher http://fswiki.us/index.php?title=Molds&diff=1018 2020-05-17T22:57:33Z

<p>Rocher: </p> <hr /> <div>==How to Design a Mold==<br /> ===Female Mold===<br /> <br /> ===Male Mold===<br /> <br /> ===Draft Analysis===<br /> While designing a mold, a draft analysis should be performed before the final design. A draft analysis examines potential trouble errors where the geometry would prevent the part being removed without being damaged. <br /> <br /> <br /> Many CAD software have a draft analysis package available which is able to perform the analysis. <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [[Category:Manufacturing Techniques]]</div>

Rocher http://fswiki.us/index.php?title=Molds&diff=1017 2020-05-17T22:57:11Z

<p>Rocher: </p> <hr /> <div>==How to Design a Mold==<br /> <br /> <br /> <br /> <br /> <br /> ===Female Mold===<br /> <br /> <br /> <br /> ===Male Mold===<br /> <br /> ======<br /> <br /> <br /> <br /> ===Draft Analysis===<br /> While designing a mold, a draft analysis should be performed before the final design. A draft analysis examines potential trouble errors where the geometry would prevent the part being removed without being damaged. <br /> <br /> <br /> Many CAD software have a draft analysis package available which is able to perform the analysis. <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [[Category:Manufacturing Techniques]]</div>

Rocher http://fswiki.us/index.php?title=Epoxy&diff=1015 2020-05-17T22:48:13Z

<p>Rocher: Epoxy?</p> <hr /> <div>[[Category:Materials]]</div>

Rocher http://fswiki.us/index.php?title=Structural_Equivalency_Spreadsheet&diff=1014 2020-05-17T22:46:05Z

<p>Rocher: SES!</p> <hr /> <div>Also better known as the SES<br /> <br /> <br /> <br /> <br /> [[Category:Chassis]]</div>

Rocher http://fswiki.us/index.php?title=Body_Panel&diff=1012 2020-05-17T22:43:55Z

<p>Rocher: Starting a body panel page?</p> <hr /> <div>[[Category:Chassis]]</div>

Rocher http://fswiki.us/index.php?title=Thread:Talk:Hybrid_Chassis/Kinda_setting_up_an_outline&diff=1010 2020-05-17T22:41:52Z

<p>Rocher: New thread: Kinda setting up an outline</p> <hr /> <div>The page is kinda meant to be a catch all for all the mono-tube combos, but looking for input for how to outline it. <br /> <br /> Also, having examples from what past teams would be great!</div>

Rocher http://fswiki.us/index.php?title=Talk:Hybrid_Chassis&diff=1011 2020-05-17T22:41:52Z

<p>Rocher: Talk page autocreated when first thread was posted</p> <hr /> <div></div>

Rocher http://fswiki.us/index.php?title=Machining&diff=897 2020-05-17T03:17:48Z

<p>Rocher: /* CNC Machining */</p> <hr /> <div>==Presses==<br /> ==Drill Press==<br /> ==Lathes==<br /> ==Mills==<br /> ==Taps and Dies==<br /> ==CNC Machining==<br /> Computer Numerically Controlled (CNC) Machining is a process which takes programmed tool paths via user input in order to machine a part. Programming the tool paths is done in a Computer Aided Manufacturing (CAM) software, which allows the programmer to choose the tools used for machining and visually simulate the machining if the part. The program is transferred <br /> <br /> <br /> Precision and finish is generally higher with CNC parts as everything is controlled by a computer.<br /> <br /> <br /> <br /> <br /> ===2 Axis===<br /> 2 Axis machining generally the X and Y axis <br /> <br /> <br /> 2.5 axis machining.<br /> <br /> <br /> <br /> <br /> ===3 Axis===<br /> <br /> <br /> <br /> ===Multi-axis ===<br /> Multi-axis CNC Machining is any CNC machining performed on a machine with greater than 3 axis (degrees of freedom) control. Different variations <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [[Category:Manufacturing Techniques]]</div>

Rocher http://fswiki.us/index.php?title=Monocoque&diff=895 2020-05-17T02:47:43Z

<p>Rocher: Added some parts to intro and analysis</p> <hr /> <div>A monocoque is a fully enclosed structural chassis where the loads are supported by the skin. This could be done by either folding a sheet material (such as aluminum sandwich or sheet metal) or manufacturing components with molding a material (such as [[Carbon Fiber Reinforced Polymer|CFRP]] or [[Glass Fiber Reinforced Polymer|GFRP]]).Generally this design is seen as more challenging compared to a tube frame, but can have considerable performance benefits if done properly. <br /> <br /> <br /> A monocoque chassis should be worked towards in increments and is not recommended to have as a chassis without proper validation or manufacturing resources. A general practice is to start with a tube frame design which meets FSAE rules and design requirements of the team, and then to add shear panels for the body. Once a team as proper experience and understanding of the chassis, they can attempt a monocoque.<br /> =Design=<br /> =Manufacturing &lt;br /&gt;=<br /> Separate page on Composite manufacturing<br /> =Analysis=<br /> ====Longitudinal Torsion====<br /> Consider the monocoque as a cylinder with with cutouts. <br /> <br /> [[File:Longitudinal Torsion.PNG|250px|right|middle|thumb|Simpilifed Longitudinal Torsion Model]]<br /> <br /> <br /> ====Vertical Bending====<br /> [[File:Vertical Bending.PNG|250px|right|middle|thumb|Simplified Vertical Bending Model]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> ====Lateral Bending====<br /> [[File:Lateral Bending.PNG|250px|right|middle|thumb|Simplified Lateral Bending Model]]<br /> <br /> <br /> <br /> <br /> ====Localized Bending====<br /> ====Fatigue====<br /> Need to add reference for images: Design, Analysis and Testing of a Formula SAE Car Chassis, William B. Riley and Albert R. George<br /> ==Simulation==<br /> Throw it in ansys acp. Hit send<br /> <br /> <br /> <br /> <br /> ==Physical==<br /> ==Notable Monocoque Designs==<br /> ====McGill Formula Electric 2019====<br /> [[Category:Chassis]]</div>

Rocher http://fswiki.us/index.php?title=File:Lateral_Bending.PNG&diff=894 2020-05-17T02:45:58Z

<p>Rocher: </p> <hr /> <div></div>

Rocher http://fswiki.us/index.php?title=File:Vertical_Bending.PNG&diff=893 2020-05-17T02:45:18Z

<p>Rocher: </p> <hr /> <div></div>

Rocher http://fswiki.us/index.php?title=File:Longitudinal_Torsion.PNG&diff=892 2020-05-17T02:26:26Z

<p>Rocher: </p> <hr /> <div>Simplified Longitudinal Torsion Model</div>

Rocher http://fswiki.us/index.php?title=Monocoque&diff=891 2020-05-17T01:53:32Z

<p>Rocher: /* Manufacturing */</p> <hr /> <div>A monocoque is a fully enclosed structural chassis where the loads are supported by the skin. This could be done by either folding a sheet material (such as aluminum sandwich or sheet metal) or manufacturing components with molding a material (such as [[Carbon Fiber Reinforced Polymer|CFRP]] or [[Glass Fiber Reinforced Polymer|GFRP]]).<br /> <br /> <br /> <br /> <br /> <br /> <br /> Generally this design is seen as more challenging compared to a tube frame, but can have considerable performance benefits if done properly. <br /> =Design=<br /> Approach for designing a monocoque should be in increments. A general practice is to start with a tube frame design which meets FSAE rules and design requirements of the team. <br /> <br /> <br /> <br /> <br /> =Manufacturing &lt;br /&gt;=<br /> <br /> <br /> <br /> <br /> <br /> Separate page on Composite manufacturing<br /> <br /> =Analysis=<br /> <br /> ====Longitudinal Torsion====<br /> Consider the monocoque as a cylinder with with cutouts.<br /> <br /> <br /> <br /> <br /> ====Vertical Bending====<br /> <br /> <br /> <br /> ====Lateral Bending====<br /> <br /> <br /> <br /> ====Localized Bending====<br /> <br /> <br /> <br /> ====Fatigue ====<br /> <br /> <br /> <br /> <br /> <br /> ==Simulation==<br /> Throw it in ansys acp. Hit send<br /> <br /> <br /> <br /> <br /> ==Physical==<br /> <br /> <br /> <br /> [[Category:Chassis]]</div>

Rocher http://fswiki.us/index.php?title=User:DP_CFD&diff=890 2020-05-17T01:51:59Z

<p>Rocher: </p> <hr /> <div>&quot;Have you heard of DP, the CFD god?&quot; - some guy in the library</div>

Rocher http://fswiki.us/index.php?title=Monocoque&diff=886 2020-05-16T20:35:19Z

<p>Rocher: </p> <hr /> <div>A monocoque is a fully enclosed structural chassis where the loads are supported by the skin. This could be done by either folding a sheet material (such as aluminum sandwich or sheet metal) or manufacturing components with molding a material (such as [[Carbon Fiber Reinforced Polymer|CFRP]] or [[Glass Fiber Reinforced Polymer|GFRP]]).<br /> <br /> <br /> <br /> <br /> <br /> <br /> Generally this design is seen as more challenging compared to a tube frame, but can have considerable performance benefits if done properly. <br /> =Design=<br /> Approach for designing a monocoque should be in increments. A general practice is to start with a tube frame design which meets FSAE rules and design requirements of the team. <br /> <br /> <br /> <br /> <br /> =Manufacturing &lt;br /&gt;=<br /> <br /> {{Main|Molds}}Please stop yelling<br /> <br /> <br /> <br /> <br /> Sorry. I just have a really triggering experience of people wanting to make a monocoque, but designing for aesthetics rather then manufacturbility.<br /> <br /> <br /> <br /> <br /> Separate page on Composite manufacturing<br /> <br /> <br /> <br /> <br /> =Analysis=<br /> <br /> ====Longitudinal Torsion====<br /> Consider the monocoque as a cylinder with with cutouts.<br /> <br /> <br /> <br /> <br /> ====Vertical Bending====<br /> <br /> <br /> <br /> ====Lateral Bending====<br /> <br /> <br /> <br /> ====Localized Bending====<br /> <br /> <br /> <br /> ====Fatigue ====<br /> <br /> <br /> <br /> <br /> <br /> ==Simulation==<br /> Throw it in ansys acp. Hit send<br /> <br /> <br /> <br /> <br /> ==Physical==<br /> <br /> <br /> <br /> [[Category:Chassis]]</div>

Rocher http://fswiki.us/index.php?title=Pedal_Box&diff=862 2020-05-16T19:33:02Z

<p>Rocher: </p> <hr /> <div>The pedals sit in here<br /> <br /> <br /> <br /> <br /> [[Category:Ergonomics]]</div>

Rocher http://fswiki.us/index.php?title=Pedal_Box&diff=860 2020-05-16T19:30:57Z

<p>Rocher: Starting pedal box page</p> <hr /> <div>The pedals sit in here</div>

Rocher http://fswiki.us/index.php?title=Monocoque&diff=859 2020-05-16T19:26:07Z

<p>Rocher: </p> <hr /> <div>A monocoque is a fully enclosed structural chassis where the loads are supported by the skin. This could be done by either folding a sheet material (such as aluminum sandwich or sheet metal) or manufacturing components with molding a material (such as [[Carbon Fiber Reinforced Polymer|CFRP]] or [[Glass Fiber Reinforced Polymer|GFRP]]).<br /> <br /> <br /> [[Category:Chassis]]<br /> <br /> <br /> <br /> <br /> =DESIGN FOR MANUFACTURING=<br /> Maybe have a completely separate page for molds?<br /> <br /> <br /> <br /> <br /> Separate page on Composite manufacturing</div>

Rocher http://fswiki.us/index.php?title=User:Rocher&diff=847 2020-05-16T19:04:31Z

<p>Rocher: Created page with &quot;Carbon vinyl wrapped carbon&quot;</p> <hr /> <div>Carbon vinyl wrapped carbon</div>

Rocher http://fswiki.us/index.php?title=Honeycomb_Core&diff=846 2020-05-16T19:02:56Z

<p>Rocher: Creating Honeycomb page</p> <hr /> <div>Structure design <br /> ==Honeycomb==<br /> <br /> ==Over Expanded==<br /> <br /> ==Flexible Core==<br /> <br /> <br /> <br /> =Material=<br /> <br /> ==Nomex==<br /> <br /> ==Aluminum ==<br /> <br /> ==Aramid==</div>

Rocher http://fswiki.us/index.php?title=Titanium&diff=835 2020-05-16T18:52:43Z

<p>Rocher: Creating Titanium page</p> <hr /> <div>How to read titanium names <br /> <br /> <br /> <br /> <br /> explain different series that are used in FSAE<br /> <br /> <br /> <br /> <br /> 3D printed stuff?<br /> <br /> <br /> <br /> <br /> [[Category:Materials]]</div>

Rocher http://fswiki.us/index.php?title=User:DP_CFD&diff=831 2020-05-16T18:46:04Z

<p>Rocher: </p> <hr /> <div>CFD god DP</div>

Rocher http://fswiki.us/index.php?title=Composite&diff=821 2020-05-16T18:36:11Z

<p>Rocher: </p> <hr /> <div>A composite is a material which is composed of two physically distinct and mechanically separable phases. One material serves as the fiber while a second serves as the matrix.<br /> <br /> <br /> <br /> <br /> =Composite Manufacturing=<br /> Manufacturing of composite is an essential factor which should be considered when design composite components. The type of material, the form of material, mold design and processing method are all factors that need to be considered. <br /> ==Prepreg==<br /> ===Curing===<br /> Ramp <br /> <br /> <br /> Dwell<br /> <br /> <br /> Cool down<br /> <br /> <br /> <br /> <br /> ==Dry Weave==<br /> ===Resin Infusion===<br /> Resin is provided succ to flow through the dry weave <br /> <br /> <br /> <br /> <br /> ===Wetlay===<br /> Resin is applied, usually by pouring <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [[Category:Materials]]<br /> &lt;span class=&quot;code&quot;&gt;&lt;/span&gt;</div>

Rocher http://fswiki.us/index.php?title=Composite&diff=820 2020-05-16T18:34:47Z

<p>Rocher: </p> <hr /> <div>A composite is a material which is composed of two physically distinct and mechanically separable phases. One material serves as the fiber while a second serves as the matrix.<br /> <br /> <br /> <br /> <br /> =Composite Manufacturing=<br /> Manufacturing of composite is an essential factor which should be considered when design composite components. The type of material, the form of material, mold design and processing method are all factors that need to be considered. <br /> ==Prepreg==<br /> <br /> ===Curing===<br /> Ramp <br /> <br /> <br /> Dwell<br /> <br /> <br /> Cool down<br /> <br /> <br /> <br /> <br /> ==Dry Weave==<br /> <br /> ===Resin Infusion===<br /> Resin is provided succ to flow through the dry weave <br /> <br /> <br /> <br /> <br /> ====Wetlay====<br /> Resin is applied, usually by pouring <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [[Category:Materials]]<br /> &lt;span class=&quot;code&quot;&gt;&lt;/span&gt;</div>

Rocher http://fswiki.us/index.php?title=Sandwich_Panel&diff=816 2020-05-16T18:12:41Z

<p>Rocher: Starting Sandwich panel page</p> <hr /> <div>Panel (generally composite) that is made of core middle sandwiched between sheets of material.</div>

Rocher http://fswiki.us/index.php?title=Aluminum&diff=814 2020-05-16T18:08:15Z

<p>Rocher: </p> <hr /> <div>A metal which is commonly used for its light weight property while still being somewhat strong.<br /> <br /> <br /> <br /> <br /> How to read the aluminum material names.<br /> <br /> <br /> <br /> <br /> #### -##<br /> <br /> <br /> <br /> Fatigue Analogy: Aluminum runs short sprints while steel does marathons/<br /> <br /> <br /> <br /> <br /> =6000 Series=<br /> ==6061-T6==<br /> =7000 Series=<br /> ==7075-T6==<br /> <br /> [[Category:Materials]]</div>

Rocher http://fswiki.us/index.php?title=Aluminum&diff=813 2020-05-16T18:07:15Z

<p>Rocher: Creating Aluminum</p> <hr /> <div>A metal which is commonly used for its light weight property while still being somewhat strong.<br /> <br /> <br /> <br /> <br /> How to read the aluminum material names.<br /> <br /> <br /> <br /> <br /> ####-##<br /> <br /> <br /> <br /> <br /> Fatigue Analogy: Aluminum runs short sprints while steel does marathons/<br /> <br /> <br /> <br /> <br /> =6000 Series=<br /> ==6061-T6==<br /> <br /> <br /> <br /> =7000 Series=<br /> <br /> ==7075-T6==</div>

Rocher http://fswiki.us/index.php?title=Carbon_Fiber_Reinforced_Polymer&diff=806 2020-05-16T17:32:05Z

<p>Rocher: </p> <hr /> <div>Carbon Fiber Reinforced Polymer (CFRP) is a composite material consisting of carbon fiber material and <br /> <br /> <br /> <br /> <br /> Graphite vs Carbon<br /> <br /> <br /> <br /> <br /> Don't lick prepreg<br /> <br /> <br /> <br /> <br /> [[Category:Materials]]</div>

Rocher http://fswiki.us/index.php?title=Composite&diff=801 2020-05-16T17:28:36Z

<p>Rocher: </p> <hr /> <div>A composite is a material which is composed of two physically distinct and mechanically separable phases. One material serves as the fiber while a second serves as the matrix.<br /> <br /> <br /> <br /> <br /> <br /> <br /> &lt;span class=&quot;code&quot;&gt;[[Category:Chassis]]&lt;/span&gt;</div>

Rocher http://fswiki.us/index.php?title=User:DP_CFD&diff=795 2020-05-16T17:23:11Z

<p>Rocher: Created page with &quot;Some guy that does CFD&quot;</p> <hr /> <div>Some guy that does CFD</div>

Rocher http://fswiki.us/index.php?title=Composite&diff=791 2020-05-16T17:15:02Z

<p>Rocher: Creating composite page</p> <hr /> <div>A composite is a material which is composed of two physically distinct and mechanically separable phases. One material serves as the fiber while a second serves as the matrix.</div>

Rocher http://fswiki.us/index.php?title=Computational_Fluid_Dynamics&diff=788 2020-05-16T17:00:39Z

<p>Rocher: </p> <hr /> <div>&lt;span&gt;Rainbow air&lt;/span&gt;<br /> <br /> <br /> Colorful Fluid Dynamics<br /> <br /> <br /> Can't Fit the Data<br /> <br /> <br /> Conspiracy Fraud Deceit<br /> <br /> <br /> <br /> <br /> Less contour plots and more 2d graphs.<br /> <br /> <br /> <br /> <br /> probably should have notes on meshing, model selection (suggested and why), analysis/postprocessing<br /> <br /> <br /> <br /> <br /> <br /> <br /> Aero is just a feature<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> [[Category:Body and Aero]]<br /> [[Category:Internal Combustion]]</div>

Rocher http://fswiki.us/index.php?title=Glass_Fiber_Reinforced_Polymer&diff=785 2020-05-16T16:54:37Z

<p>Rocher: Starting GFRP page</p> <hr /> <div>Glass Fiber Reinforced Polymer (GFRP) is a composite material with a glass fiber and polymer matrix.<br /> <br /> <br /> <br /> <br /> Benefits of for grounding?<br /> <br /> <br /> <br /> <br /> Virgin GFRP vs. Chad CFRP</div>

Rocher http://fswiki.us/index.php?title=Carbon_Fiber_Reinforced_Polymer&diff=780 2020-05-16T16:47:42Z

<p>Rocher: Starting page on CFRP</p> <hr /> <div>Carbon Fiber Reinforced Polymer (CFRP) is a composite material consisting of carbon fiber material and <br /> <br /> <br /> <br /> <br /> Graphite vs Carbon<br /> <br /> <br /> <br /> <br /> Don't lick prepreg</div>

Rocher http://fswiki.us/index.php?title=Monocoque&diff=770 2020-05-16T16:27:51Z

<p>Rocher: </p> <hr /> <div>A monocoque is a fully enclosed structural chassis where the loads are supported by the skin. This could be done by either folding a sheet material (such as aluminum sandwich or sheet metal) or manufacturing components with molding a material (such as CFRP or GFRP).<br /> <br /> <br /> [[Category:Chassis]]<br /> <br /> <br /> <br /> <br /> =DESIGN FOR MANUFACTURING=<br /> <br /> <br /> <br /> <br /> <br /> Maybe have a completely separate page for molds?<br /> <br /> <br /> <br /> <br /> Separate page on Composite manufacturing</div>

Rocher http://fswiki.us/index.php?title=Monocoque&diff=464 2020-05-15T04:38:48Z

<p>Rocher: </p> <hr /> <div>A monocoque is a fully enclosed structural chassis where the loads are supported by the skin.</div>

Rocher http://fswiki.us/index.php?title=Monocoque&diff=463 2020-05-15T04:12:08Z

<p>Rocher: Creating Monocoque page</p> <hr /> <div>A monocoque is a fully enclosed chassis</div>

Rocher http://fswiki.us/index.php?title=Category:Chassis&diff=462 2020-05-15T04:09:36Z

<p>Rocher: </p> <hr /> <div>[[Category:Vehicle]]<br /> * Tube Frame<br /> * [//fswiki.us/index.php/Monocoque Monocoque]<br /> * [//fswiki.us/index.php/HybridChassis Hybrid Chassis]</div>

Rocher